Bat Control in Orlando FL

Bat Removal In Orlando, FL Bats create large roosting colonies inside the roofs of exposed buildings. The bats leave mass amounts of droppings which are unpleasant in odor and appearance, but more importantly are a major source of the respiratory disease histoplamosis. Florida bat removal involves carefully inspecting a building to find how the animals are using it and then setting up an exclusion system. Bats are not killed, exterminated, or trapped in this process..

	Bat Removal From Building Roof or Attic     Bat removal is performed through exclusion. Bats are not exterminated or even trapped in this removal process. A one-way system is setup allowing Florida bats to leave the building but not return. .
	Orlando Bat Exclusion Experts     Our bat experts have performed hundreds of successful exclusion projects throughout Orlando and throughout Florida. Click here to learn more about our company's removal process and how we handle dealing with different architectural problems. .
	Florida Bat Control Photos     This is our collection of Florida bat removal photos taken while performing colony exclusion. .

Bat Watch for Infestation Confirmation. To confirm that bats are actually roosting in or on a building, look for bats flying in and out of a site and/ or for signs of infestation. A bat watch can be conducted by two people (more may be necessary to observe large or complex sites) posted at opposite corners of a structure. An evening watch begins about 30 minutes before dark and a morning watch begins about 1 hour before dawn. Observations should continue for approximately 1 hour.

Such observations can indicate exit/ entry points and the number of bat removal in Orlando. With practice, distinguishing some bat species may also be possible. For example, compared to the big brown bat, the little brown bat is noticeably smaller in size, and its flight has more rapid wing beats, and more rapid turning and darting.

It may be necessary to watch for more than one night to compensate for weather conditions, bats’ sensitivity to observers, noisy or inexperienced observers, and improper use of light. Bat removal can be enhanced with a standard flashlight, but be certain to keep the bright part of the beam as far as possible away from the exit hole being observed. Bright light will increase bats’ reluctance to exit and may result in an incomplete exit of the colony.

Orlando bat removal is valuable observation aid is a powerful, rechargeable flashlight equipped with a plastic, red pop-off filter. Also, an electric headlamp, supplied with rechargeable batteries and fitted to a climbing or spelunking helmet, allows hands-off illumination outdoors as well as indoors when exploring roost locations. Bats are sensitive to light intensity and can visually discriminate shapes and patterns in extremely low light situations. They can only see in black and white; hence, the low-contrast illumination and soft shadows produced by red light has little effect on bats.

What if you find a bat in your home?
On occasion, a solitary bat may accidently fly into a home, garage or other building through an open door or window. Such incidents often involve lost youngsters whose primary goal is a safe escape. As long as no direct contact with the bat has occurred, it can be released outside. These bats will usually leave on their own if a window or door to the outside is opened while others leading to the rest of the building are closed. Bats are rarely aggressive, even if chased, but may bite if handled. As with any wild animal, bats should not be touched with bare hands, and anyone bitten should immediately seek medical consultation.

If a bat does not leave your home on its own, its exit can be hastened by waiting until it lands, and then covering it with a small box or other container. Slip a piece of cardboard between the wall and box, slide the bat into the box, then release the bat outside. You may also catch it by hand, using leather work gloves to avoid being bitten. Keep doors and windows to buildings closed, and window screens in good repair, to prevent bats from reentering.

Where do bats roost? Bats may roost in attics, soffits, louvers, chimneys, under siding, eaves, roof tiles or shingles and behind shutters (see diagram). In sports stadiums and parking garages, bats sometimes roost in expansion joints between concrete beams. They can enter through openings as small as one-half inch in diameter (1.3 cm). Common points of entry include open windows or doors, broken or poorly-fitted screens, loose or missing shingles or tiles, places where flashing or boards have come loose and locations where pipes or wiring enter buildings. Openings often occur where walls meet the eaves at the gable ends of an attic, where porches attach to the main part of a house, or where dormers meet the roof.

© 2008 Wildlife Patrol, Inc.   |  (407) 810-1381   |   critterproof@gmail.com   |  Licensed & Insured   |  Bat Control Orlando